Fixing, Finishing and Storage Nelson Pine（修改、整理和存储纳尔逊松）.pdf

12 Fixing, Finishing and Storage Machining Screw Position GoldenEdge MDF Panels can be worked easily with standard The position of screws inserted into the faces and edges of wood working machinery. The homogenous nature of MDF should be decided in relation to board thickness and GoldenEdge ensures that a good finish can be achieved on screw size. Screws inserted into the edges should be not the edges. less than 25mm from the corners. Tungsten carbide cutters and saws are recommended. Screw Tension Laminating The screw must not be overtightened as further turning will Because of its light colour GoldenEdge MDF is an ideal reduce the holding strength. substrate for laminating with natural wood veneer, vinyls, Screw Withdrawal Strengths printed papers, foils and melamine papers. To illustrate the holding power of screws in GoldenEdge A balanced laminated panel would eliminate minor cupping MDF the forces required to withdraw typical parallel thread or bowing. screws in an axial direction from 16mm GoldenEdge MDF Care must be taken to ensure that conditions of very high faces and edges are given below. press pressure, high press temperature and long press times do not exist during laminating. Screw Gauge D