FLOATING SELFCLINCHING FASTENERS （浮动SELFCLINCHING紧固件）.pdfVIP

FLOATING SeLF-CLINCHING FASTeNeRS BULLeTIN ALA 216 Re v 816 FLOATING SELF-CLINCHING FASTENERS Locking and Non-locking Threads • Provide load-bearing threads in thin sheets • Permit a minimum of .030”/0.76 mm adjustment for mating hole misalignment. • Sheet remains flush on one side, and the fastener is permanently locked in place. • Threads of the floating nut extend into the retainer shank for extra strength and support in assembly. Types AC/AS Type A4 Non-Locking Threads Type AC/AS/A4 self-clinching, floating nuts provide free running threads. Type A4 nuts are specifically designed for installing into stainless steel sheets. Locking Threads Types LAC/LAS Type LA4 Types LAC/LAS/LA4 self-clinching, floating nuts provide prevailing torque locking threads with performance equivalent to applicable NASM25027 specifications(1). Type LA4 nuts are specifically designed for installing into stainless steel sheets. (1) To meet national aerospace standards and to obtain testing documentation, product must be ordered to US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM). Screws for use with PEM self-clinching locking fasteners should be Class 3A/4h fit or no smaller than Class 2A/6g. NON-LOCKING Types AS, AC, A4