Fundamentals of Structural Design Part of Steel （钢结构设计基础的一部分）.pdf

Fundamentals of Structural Design Part of Steel Structures Civil Engineering for Bachelors 133FSTD Teacher: Zdeněk Sokol Office number: B619 1 Syllabus of lectures 1. Introduction, history of steel structures, the applications and some representative structures, production of steel 2. Steel products, material properties and testing, steel grades 3. Manufacturing of steel structures, welding, mechanical fasteners 4. Safety of structures, limit state design, codes and specifications for the design 5. Tension, compression, buckling 6. Classification of cross sections, bending, shear, serviceability limit states 7. Buckling of webs, lateral-torsional stability, torsion, combination of internal forces 8. Fatigue 9. Design of bolted and welded connections 10. Steel-concrete composite structures 11. Fire and corrosion resistance, protection of steel structures, life cycle assessment 2 1 Connections Welding  in workshop Bolting  on site On-site welding is also acceptable but should be avoided when possible as it brings some difficulties maintaining the proper environment for welding to achieve good quality, need for completing/repair of corrosion protection, need for qualified workers, etc. Design of connections: to comply to resistance of connected elements (connections are not the weak part of the structure) to resist calculated internal forces (connections might be the weak part of the structure)