IS, ISL, IC, H The Genie Company（ISL是IC,H公司精灵）.pdfVIP

3511035556 ¤ ® Series IS, ISL, IC, H Includes Remote Control and SERIES II Electronics Included Wall Control MUST be installed prior to operation of this Garage Door Operator Safe-T-Beam® Safety Reverse System Must be installed to close door NOTE: Your Residential Operator comes with a Rail Assembly which is standard for up to a 7 foot 6 inch high door. An extension kit for an 8 foot high door is available. For Answers and Assistance: 1.800.354.3643 or visit SAVE THIS MANUAL FOR FUTURE REFERENCE PRE-INSTALLATION CHECK LIST FOR HELP-1.800.354.3643 OR GENIECOMPANY.COM Things to consider if you are planning to “do-it-yourself.” Whether you are replacing an existing garage door operator or installing an operator in your garage for the first time, there are some pre-installation issues which need to be addressed. 2 They are as follows: The Genie Company recommends that you read and fully understand all information and instructions contained herein before choosing a “do-it-yourself ” installation. Any questions should be directed to the Genie Company or an authorized Genie Dealer. ( ) The issue numbers below refer to the circled numbers in the illustrations on page 3. 1 Check your ceiling where the power You need a 110-120 Volt power supply head of your new unit will be mounted. 5 available. The outlet should be no more than Plan how you will be mounting the power head. 3 feet from the power head once it is mounted. (The It is possible that ceiling joists may not be in