Sch228;fer + Peters GmbH Isol（彼得斯Sch228;带+ GmbH隔离）.pdf

Schäfer + Peters GmbH TECHNICAL INFORMATION FOR STAINLESS STEEL FASTENERS T a b l e o f c o n t e n t s I. DIN and ISO standards and what they mean a) The term standardisation b) The organisation and issuers of standards ►Tab. 1 – The diversity of standards c) What does a DIN standard reveal? d) Properties of stainless steel screws at increased temperatures ►Tab. 2 – An overview of changes to standards ►Tab. 3 – Changes to hexagonal screws and nuts ►Tab. 4 – Changes to the dimensions of hexagonal screws and nuts ►Tab. 5 – Changes to small metric screws ►Tab. 6 – Changes to pins and bolts ►Tab. 7 – Changes to tapping screws ►Tab. 8 – Changes to threaded pins ►Tab. 9 – Technical terms of delivery and basic standards1 II. Mechanical properties of special-grade stainless steel a) The labelling system for the austenitic steel group according to ISO ►Tab. 10 – Common stainless steels and their composition b) Classification of strength of stainless steel screws ►Tab. 11 – Extract from DIN EN ISO 3506-1 c) Yield strength loads for shoulder studs ►Tab. 12 – Yield strength loads for shoulder studs d) Properties of stainless steel screws at increased temperatures ►Tab. 13 – Strength class 70 e) Reference values for tightening torques and their friction coefficients ►Tab. 14 – Reference values for tightening torques Tab. 15 – Friction coefficients µ G and µK for screws made from stainless steel and anti-corrosion steel ►Tab. 16 – Friction coefficients µ G and µK for screws and nuts made from stainless steel and anti-corrosion steel f) Magnetic properties of austenitic stainless steel III. Corrosion resistance of special grade A2 and A4 stainless steel