Sleipner eng R1609 Uddeholm（斯莱eng R1609 Uddeholm）.pdf

Uddeholm Sleipner Uddeholm Sleipner® 1 Uddeholm Sleipner © UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties of the products described or a warranty for fitness for a particular purpose. Classified according to EU Directive 1999/45/EC For further information see our “Material Safety Data Sheets”. Edition 11, revised 09.2016, not printed 2 Uddeholm Sleipner Uddeholm Sleipner® THE CHANGING TOOLING ENVIRONMENT The tooling environment is changing to adapt to the changing market environment. Lead times are one aspect of this change and they are getting shorter and shorter. This ultimately means that more emphasis has to be placed on tool reliability in service and on time to manufac- ture the tooling. The production materials used nowadays are placing more demands on the tools and the tool steels used to manufacture them. For example, advanced high strength steel materials now being used for automotive parts place extra demands on resistance to chipping and cracking, compressive strength and wear resistance. THE MODERN GENERAL COLD WORK TOOL STEEL The classical 12 % Cr-steel such as AISI D2 or W.-Nr. 1.2379 are still the backbone of cold work tooling but their limitations are becoming more and more apparent in the changing production environment. Uddeholm Sleipner is a new 8 % Cr-steel from Uddeholms AB. Its property profile has been carefully balanced and the result is a very ver