Small Straight Centrifugal Pedestal Pumps （小直基座的离心泵）.pdfVIP

Specifications Information and Repair Parts Manual 3682, 3694, and 3704 Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. The Safety Instructions are contained in the General Operating Instructions. Failure to comply with the safety instructions accompanying this product could result in personal injury and/or property damage! Retain instructions for future reference. AMT reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2011 American Machine Tool Co., Inc. of PA, A Subsidiary of The Gorman-Rupp Company, All Rights Reserved. Periodic maintenance and inspection is required on all pumps to insure proper operation. Unit must be clear of debris and sediment. Inspect for leaks and loose bolts. Failure to do so voids warranty. Small Straight Centrifugal Pedestal Pumps Refer to pump manual 1808-635-00 for General Operating and Safety Instructions. DESCRIPTION These pumps are for continuous duty, low pressure applications that do not require self-priming. Discharge port rotates 360º in 90º increments. Pumps incorporate a mechanical shaft seal and O-ring casing seal. All units for use with nonflammable, non-abrasive liquids compatible with pump component materials. STAINLESS STEEL UNITS (300 Series SS) Pump construction is cast 316 stainless steel with shaft seal of stainless steel, carbon, ceramic, and Viton elastomers. Handle liquids from 40° to 200° F (4° to 93° C). BRONZE UNITS Pump construction is cast bronze casing with cast 316 stainless steel impeller and pedestal. Includes shaft seal of stainless