Standard Test Method for Voltage Endurance of （标准电压耐力的测试方法）.pdfVIP

An American National Standard Designation: D 2275 – 01 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface1 This standard is issued under the fixed designation D 2275; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1. Scope ity by Means of Aqueous Glycerin Solutions3 1.1 This test method differentiates among solid electrical D 6054 Practice for Conditioning Electrical Insulating Ma- insulating materials for use at commercial power frequencies terials for Testing4 with respect to their voltage endurance under the action of E 41 Terminology Relating to Conditioning4 corona (see Note 1). In general, this test method is more E 104 Practice for Maintaining Constant Relative Humidity meaningful for rating materials with respect to their resistance by Means of Aqueous Solutions5 to prolonged a-c stress under corona conditions than is dielec- E 171 Specification for Standard Atmospheres for Condi- tric strength. tioning and Testing Flexible Barrier Materials6 2.2 Special Tec