Surface Roughness Comparator DATA LD2040, （表面粗糙度比较器LD2040数据,）.pdfVIP

Surface Roughness Comparator DATA- SHEET LD2040, LD2050 Product The profile created by the abrasive blast cleaning process consists of irregular ‘peaks and valleys’ Description: that are difficult to measure and classify. The International Standards Organization under the Standard ISO 8503-Part 1 specifies that surface profiles should be classified as either dimples, where shot abrasive is used or angular for grit abrasive. Both classifications are then graded in terms of Fine, Medium or Coarse. The Surface Roughness Comparator allows quick and easy identification of the various grades. The two high purity nickel reference plates are subdivided into four sections, each containing a different electro-formed profile, copied from a certified mild steel master. Standards ASTM D 4417 Method A, ISO 8503-1, ISO 8503-2 Application/ application area’s: Coating industry, galvanize, laboratory, paint, painter, shipping industry, steel protection Features: - High purity nickel reference plates - Electro formed profile - Each profile copied from a certified mild steel master - Sturdy leather wallet to protect the test surfaces when not in use - Available for shot- and grit blasting Use By placing the appropriate comparator (G for Grit, S for Shot) against a blast cleaned surface, the finish achieved can be compared against the four sections of the comparator. It is t