System Design Document Maryland（系统设计文档马里兰）.docVIP

System Design Document Overview The System Design Document describes the system requirements, operating environment, system and subsystem architecture, files and database design, input formats, output layouts, human-machine interfaces, detailed design, processing logic, and external interfaces. INTRODUCTION Purpose and Scope This section provides a brief description of the Systems Design Document’s purpose and scope. Project Executive Summary This section provides a description of the project from a management perspective and an overview of the framework within which the conceptual system design was prepared. If appropriate, include the information discussed in the subsequent sections in the summary. System Overview This section describes the system in narrative form using non-technical terms. It should provide a high-level system architecture diagram showing a subsystem breakout of the system, if applicable. The high-level system architecture or subsystem diagrams should, if applicable, show interfaces to external systems. Supply a high-level context diagram for the system and subsystems, if applicable. Refer to the requirements trace ability matrix (RTM) in the Functional Requirements Document (FRD), to identify the allocation of the functional requirements into this design document. Design Constraints This section describes any constraints in the system design (reference any trade-off analyses conducted such, as resource use versus productivity, or conflicts with other systems) and includes any assumptions made by the project team in developing the system design. Future Contingencies This section describes any contingencies that might arise in the design of the system that may change the development direction. Possibilities include lack of interface agreements with outside agencies or unstable architectures at the time this document is produced. Address any possible workarounds or alternative plans. Document Organization This section describes the organiza