焊接技师理论试题及答案（Welding technician theory, test questions and answers）.doc

焊接技师理论试题及答案（Welding technician theory, test questions and answers） Welding technician theory, test questions and answers Welding technician theory, test questions and answers A non title (is draw tick, non *) 1 、 in welding arc, the gas in the arc is a molecular or atomic state, that is, neutral state. () 2. The necessary condition for arc welding is that the medium is ionized into a conductor and the cathode continuously launches electrons. () 3, arc magnetic blow only and wire wiring position, and the size of the current is irrelevant. () 4. The lattice type of all the components changed as the solute atoms dissolved in the solid solution. () 5. The incomplete recrystallization zone of low carbon steel welded joint can only be partly transformed into ferrite and pearlite after the cooling process. () 6, when welding rod arc, the main heat source of the welding rod is the resistance heat produced by the current passing through the welding rod. () 7, the main factors affecting welding thermal cycle are welding heat input, preheating and inter layer temperature, workpiece thickness, joint form and thermal conductivity of the material itself. () 8. A welding method with only one arc static characteristic curve. () 9, increase the welding speed, the molten pool crystallization speed is accelerated, the primary crystalline structure of welding seam is obviously refined. () In 10, the welding heat source under the action of the joint on the various points of experience of welding thermal cycle is different, therefore, is not a uniform welding joint microstructure and properties are not the same. () 11. The difference of chemical composition and metallographic structure in different regions of welded joints of dissimilar metals brings about different mechanical properties of welded joints. () 12, the dilution rate of various welding methods is not very different, and the dilution rate of submerged arc welding is almost the same as the dilution rate of electrode arc weldin