硫酸转化工艺进展综述（Review of progress in sulfuric acid conversion process）.doc

硫酸转化工艺进展综述（Review of progress in sulfuric acid conversion process） This article is contributed by youxingfa Pdf documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Volume fourth, phase fifteenth, December 2001 Journal of Nantong Vocational College JOURNAL, OF, NANTONG, VOCATIONAL, COLLEGE Vol. 15, No., 4, Dec. 2001 Review of progress in sulfuric acid conversion process Shi Juan Wang (Nanjing College of Chemical Technology, Jiangsu, Nanjing 210048) Abstract: the different process and characteristics of sulfuric acid conversion and the development of sulfuric acid conversion process at home and abroad were introduced. Key words: sulfuric acid conversion process overview, classification number: TQ111. 1, literature identification code: A, article number: 1008-5327 (2001), 04 - 0047 - 03 In the process of sulfuric acid production, the conversion is the core, the conversion rate is high, the utilization rate of sulfur is high, and the environmental pollution is small. On the contrary, sulfur is not only a big loss, but also harmful to the environment. The conversion rate is related to the conversion process chosen by the conversion process. The final conversion rate of different conversion processes may be different, and the utilization rate of sulfur and the harmful gas content in the exhaust gas are different. The selection of the conversion process is based on the catalysts used in production, the sulfur dioxide concentration of the converter, the ratio of oxygen to sulfur, and the total conversion rate required. The transformation process can be divided into a single two to two suction and two categories. 1 a single process a single process is also a transformation of an absorption process. Because of the amount of catalyst and the equilibrium conversion rate limit, the process may reach the final conversion rate is 97% ~ 98%, obviously this conversion, sulfur utilization