碳素钢（carbon steel）.docVIP

碳素钢（carbon steel） Steel sorted the mechanical strength increases gradually, and the plasticity and bending performance is gradually reduced, since weldability with carbon content increases. Carbon steel refers to carbon content below 2%, and a small amount of silicon, manganese, as well as phosphorus, sulfur and other impurities of iron carbon alloy. Carbon steels used in industry generally do not contain carbon content of more than 1.4%. This is because the carbon content exceeds this amount, the steel showed a lot of hard brittle, so there is a smaller tendency to cold and brittle, and the added C elements can effectively protect the iron, not with O reaction, so there is a certain atmospheric corrosion resistance Carbon steel refers to a carbon content of less than 2%, and a small amount of silicon, manganese and phosphorus, sulfur and other impurities of iron carbon alloy standard material. Carbon steels used in industry generally do not contain carbon content of more than 1.4%. This is because the carbon content exceeds this amount, the steel showed a large hard brittle, and processing difficulties, loss of production and use value. Carbon steel according to its different quality can be divided into ordinary carbon structural steel and high-quality carbon structural steel two categories. The quality carbon structural steel stipulates that the allowable content of sulfur and phosphorus is lower than that of ordinary carbon steel, so the comprehensive mechanical performance is better than that of plain carbon steel. Carbon steels; methods of expression; numbers: Q+ numbers + quality grade symbols; methods of deoxidation symbols For example: Q235A? F? Where Q represents yield strength, 235 represents yield strength, and A indicates grade of quality, grade F, boiling steel. Q235A, F - indicates yield strength of 235N/mm2 grade A mass boiling steel. The chemical composition of carbon cast steel contains carbon, manganese, sulfur, phosphorus and other impurities besi