量体技巧（Body skills）.docVIP

量体技巧（Body skills） Garment body and belly body of male trousers cutting method 2012-12-14 17:11 Garment body and belly body of male trousers cutting method The basic method of garment volume measurement In order to ensure the fit of the garment, it is necessary to measure the size of each part of the garment when it is purchased or custom-made. The basic methods of measurement and the volume limit are as follows: It is required that when measuring the volume, the measuring body must be used to make the surveyor try to determine it to improve the accuracy of the volume. If special circumstances are not measured, the following methods may be used. First, matters needing attention before measurement 1, the body order is generally: first horizontal, straight, from top to bottom. 2. Ask the person who is measured to pose naturally without doing chest, bending, or visiting. 3, pay attention to Bohou and customer was wearing clothes needed to wear season. 4, pay attention to the tightness of the measuring tape, cut and to maintain the level of rotation is appropriate. 5, the body should pay attention to observe whether the measured body shape is normal, if the abnormal position (hump, chest, convex belly), after measuring, mark on the record, so as to adjust when cutting. 6, ask the other partys opinion, whether there are special requirements?. Note: to place volume, records must be accurate, should pay attention to the thickness of the entire single fabric (fabric thin fabric thickness less than 2cm), the production factory in the process of size is not in place, resulting in the shoulder, waist, hem easy too large. Style design, style is not the same, adding and placing is not the same. Two, measurement legend The amount of the order is: shirt collar, shoulder, chest circumference, waist circumference, hip circumference, cuff, Yichang, sleeve; The amount of the order is: trousers waist circumference, straight crotch, foot mouth, long pants. Three, measurement methods and