The Acapella SE Troels Gravesen（Acapella SE他Gravesen）.pdf

1 The Acapella SE drivers, drawings and construction pictures 2 Fig. 1. New ribbon tweeters: Aurum Cantus G2Si Fig. 2. Midrange driver:SEAS W18EX001 Fig. 3. New bass driver: SEAS W22EX001 3 Fig. 4. Cutting rear edge of side panels. Fig. 5. Marking right side panel. 4 Fig. 6. Checking panels with drawing. Fig. 7. Chamfering driver hole. 5 Fig. 8. Making a mould for gluing the side and front panels. This ensures correct angles and rear width. Fig. 9 and 10: Thanks to the mould used for gluing: two identical structures. Not that easy to accomplish I can tell from previous projects.Now the top, rear and bottom panels can be made. A small 5 x 5 mm fillet will be inserted between side and front panels. 6 Cabinet drawings Fig. 11. Drawing of bottom plane. Calculating with of side panels and total width of cabinet rear. The Acapella SE cabinet is based on the following preconditions: Front width = 290 mm. Total depth at bottom = 300 mm. The angle between front and side panel is 110 deg. Front panel is tilted 10 deg.Total height = 1190 mm. 7 Fig. 12. Acapella SE cabinet dimensions. Seen from top 8 Fig. 13. Drawing of cabinet seen from front and side. Dimensions of rear plane.