现代型单孔混水直流感应面盆龙头现代型单孔单冷直流感应面盆-科勒.PDF

13466T-CP 现代型单孔混水直流感应面盆龙头 13467T-CP 现代型单孔单冷直流感应面盆龙头 13468T-CP 现代型单孔混水交流感应面盆龙头(无交流电源盒) 13469T-CP 现代型单孔单冷交流感应面盆龙头(无交流电源盒) 13470T-CP 现代型单孔混水交流感应面盆龙头(带交流电源盒) 13471T-CP 现代型单孔单冷交流感应面盆龙头(带交流电源盒) 所有的资料是按最新出版的产品资料编写而成。 All information is based on the latest product information 科勒公司保留任何时候不经通知即可改变产品特 available at the time of publication, Kohler Co. reserves 性、包装或产品可供类型的权利。 the right to make changes in product characteristics, packaging, or availability at any time without notice. 说明书包括重要的安装、保养及清洁方面的内容， Please leave these instructions for the consumer. They 请把这些资料交给用户阅读。 contain important information. 注意事项 Notes: 1．一定要先彻底冲洗供水管以清除管道中的杂 1. Flush the water supply pipes thoroughly to remove debris. 质,使用水源为自来水或可供饮用水。 Faucet is designed for tap water or potable water. 2. Do not attack the faucet with rough strength to avoid 2 ．请勿将强力及冲击施于产品，以免造成故障， being damaged. 引起漏水。 3. Do not damage the surface of sensing window when 3．安装、清洁龙头时，切勿损伤感应窗口表面， installing or cleaning the faucet. 以免造成故障。 4. For hot and cold mixed faucet, please first rotate the 4 ．对于冷热混水龙头，当您面对龙头时,先将调 handle to the front to cold only, then rotate it back slowly to 温把手向前旋至冷水最大状态，再向后缓慢旋转， avoid being scalded by hot water. 以免烫伤。 5. For new installations, install the faucet and drain to the