UGNX – Drafting（UGNXu2014u2014起草）.pdfVIP

Engineering Fundamentals ENG1100 UGNX – Drafting 1 Session Objectives • Edge Operations • Create Engineering Drawings in UGNX • Student Presentations 2 Sketch Based Modeling 1. Sketch plane is chosen 2. 2-D sketch is created • Sketches can be the base feature of a solid body • Sketches can be added to an existing body 3. 3-D feature is created from the sketch (e.g. extrude, revolve … add, subtract, intersect) Feature can be edited by editing the constraints of the sketch 3 Edge Operations Can be added to model in modeling application Edge blend Creates cylindrical faces in place of an edge Chamfer Bevels the edges 4 Edge Operations Edge Blend Select icon or Insert Detail Feature Edge Blend Select edge(s) Key in radius Chamfer Select Insert Detail Feature Chamfer Select edge(s) Single offset Key in offset 5 UGNX: Basic Drafting Note: This is NOT a course in drafting, however, engineers need to be “graphically literate”; i.e., you need to be able to read and write engineering drawings. Today’s Objective: ● Learn basic process of converting a UG solid model into an Engineering Drawing 6 Software Structure UGNX is organized into: Applications : Gateway, Modeling, Drafting