基于matlab的mpsk性能分析.doc

基于MATLAB的MPSK性能分析 【摘 要】 通信系统中的数字调制技术是通信与信息系统领域的基础知识，而相移键控(MPSK)信号是作为常见的数字通信调制信号。目前，它已被广泛应用在传统的通信移动通信卫星通信系统它的功率和频谱效率数字调制系统的种基本调制解调方法加性高斯白噪声环境下的性能分析MPSK Performance Analysis Based On MATLAB 【Abstract】 Digital modulation technology in communication system is basic knowledge in the field of communication and information systems, and phase-shift keying (MPSK) signals are as common digital modulation signalsue to its high power and spectrum utilization, MPSK have been widely used in traditional communications, mobile communications and satellite communications systems. Grasp of the phase-shift keying signal modulation and demodulation principle will help to deepen the understanding of modulation techniques, and it play a guiding role in-depth study of a new type of modulation technique. This paper first describes the composition of the digital communication system, and then analyzes several basic digital modulation systems, mainly includes MPSK and MDPSK. At last, using the MATLAB software to simulate and analyze the MPSK and MDPSK. Through the simulation, we get the curve between signal-to-noise ratio and the error rate. Then analyzes the performance under the Gaussian white noise environment, and compares with the theory. Finally, also has carried on the comparison and the analysis to MPSK and MDPSK in the actual situation error rate. 【Key words】 Digital modulation, MPSK, MDPSK, error rate, signal-to-noise ratio 目 录 第一章 绪论 1 1.1 课题背景 1 1.2 调制技术的发展和趋势 1 1.3 课题研究的意义 2 1.4 本文内容安排 3 第二章 数字相位调制 4 2.1 数字通信系统的组成及说明 4 2.2 多进制相移键控 5 2.2.1 2PSK调制解调 5 2.2.2 4PSK调制解调 7 2.2.3 8PSK调制解调 9 2.3 多进制差分相移键控 11 2.3.1 2DPSK调制解调 12 2.3.2 4DPSK调制解调 13 2.3.3 8DPSK调制解调 16 第三章 多进制数字相位调制仿真 18 3.1 蒙特卡洛仿真的简单介绍 18 3.2 多进制数字相位调制性能仿真原理 19 3.3 MPSK系统仿真方法 20 3.3.1 部件仿真原理 21 3.3.2 MPSK仿真流程图 22 3.4 MDPSK系统的仿真方法 24 3.4.1 部件仿真原理 25 3.4.2 MDPSK仿真流程图 26 第四章 仿真结果比较和分析 29 4.1 MPSK理论误码率与实际误码率的比较 29 4.2 MDPSK理论误码率与实际误码率的比较 29 4.3 MPSK和MDPSK误码率的比较 30 第四章 总结 33 参考文献 34 致 谢 35  第一章 绪论 1.1 课题背景 数字通信系统是采用数字信号来传递信