Variable Frequency Drive (VFD) Installation （变频驱动(VFD)安装）.pdfVIP

Variable Frequency Drive (VFD) Installation Instructions Input AC Power 1. Circuit breakers feeding the VFDs are recommended to be thermal-magnetic and fast acting. They should be sized as 1.5 times the input amperage of the drive. Refer to the table below. 2. Each VFD should be fed by its own breaker. If multiple VFDs are to be combined on the same breaker, each drive should have its own protection measure (fuses or miniature circuit breaker) downstream from the breaker. 3. Input AC line wires should be run in co