Wireless Weather Station HomeWizard（无线气象站HomeWizard）.pdfVIP

Wireless Weather Station Manual (SHS-45000EU) Table of contents Quick Start Procedure 3 Introduction 4 Features 5 Contents of Complete Weather Station Kit 7 Installing your weather station 9 Setting up the Remote Weather Sensors 9 Setting up the Main Console Unit 9 Setting up the Thermo-Hygro Sensor(s) 10 Setting up the Rain Sensor 10 Setting up the Solar Powered Wind Meter 11 Using your Weather Station 13 Navigating between Different Modes 14 Using the Different Weather Modes 18 Understanding the Weather Forecast Display 21 Maintenance 34 Troubleshooting 35 Appendix 37 Technical Specifications 42 2 Quick Start Procedure Installing your weather station is quick and easy! 1. Insert batteries in the main console unit and power up the display with the adapter. 2. Pair the remote sensors (thermometer, wind meter, rain meter) with the main console with the following procedure: a. Open the battery case on the sensor b. Press the LINK button on the main console c. Insert the batteries in the sensor (within 30 seconds) d. The LINK led will blink for a second to indicate successful paring. 3. Measurements from the remote sensors are now visible on the display. 4. Mount the sensors on their designated location Find more detailed instructions and information in the remainder of this manual. 3 Introduction Congratulations on your purchase of the Wireless Weather Station. The weather station consists of a main console unit as well as an assortment of remote sensors which collect and transmit a wide range of weather data, inclu