ansys安装方法（ansys安装方法）.docVIP

ansys安装方法（ansys安装方法） Win7 ultimate Ansys10.0 successful installation method (be sure to follow the following steps to install)! As for the installation method of XP, search it online. The method here is only applicable to win7! First, the preparatory work 1. copy the MAGNiTUDE folder on the Ansys 10 installation disk to any partition of the hard disk (I am copied to the C: packing directory); 2. check whether the ansys.dat file property in the MAGNiTUDE folder is read-only and if you remove the read-only property; 3. run the Ansys 10 installation disk AutoExec.exe, finally selected a Display the license server hosted in the interface, in the box, the first line of HOSTNAME is your computer name, the second line FLEXID is your computer network card physical address, copy them down or paste the Create File generate the txt file for the record; 4. MAGNiTUDE folder in the ansys.dat Notepad program to open for editing. The first line of host to just find your computer name, 000000000000 to your network card physical address, for example: SERVER host 0000000000001055 to SERVER 3d9f56ca900a403 0015f243f5a0 1055; the second lines of DAEMON ansyslmd C:\Program Files\Ansys Inc\Shared Files\Licensing\intel\ansyslmd.exe DAEMON to VENDOR; the software works as of 2006 the date of 2006.1210 substitution in the future a year (I was 2016); and then save the file. Note: here is my 3d9f56ca900a403 computer name, 0015f243f5a0 for my ID card, in addition to ansys.dat file in the second line: DAEMON ansyslmd C:\Program Files\Ansys Inc\Shared Files\Licensing\intel\ansyslmd.exe , if the win7 is installed in the D disk, it should be changed to DAEMON ansyslmd D:\Program Files\Ansys Inc\Shared Files\Licensing\intel\ansyslmd.exe (C is changed to D), if your win7 is installed in the C drive, dont change for second, remember!!! But you have to change DAEMON to VENDOR, you have to change it! 5., then double-click on the C:\MAGNiTUDE directory to run the Keygen.bat program, which automatically g