qinq svlan（QinQ堆叠虚拟局域网）.docVIP

qinq svlan（QinQ堆叠虚拟局域网） QinQ: packet into the customer-- 10-- vlan10 on the hit label MAC address learning PC -- Mac -- the uplink interface forwarding address table Chip SVLAN: data packets into customer--, marked with native VLAN Tags - such as pass through data, labels replaced with helpvlan VLAN tags, mirror to exit - uplink interface As for external tag data, direct image to export ------------------- uplink interface NP SVLAN: packets go into customer-- without playing any tags - NP, according to session plus Tags - MAC address learning (outside label) - is forwarded according to the MAC table VFP: data packets go into customer--, put on native VLAN tags (external labels) -- according to session to replace the outer label or to the outer label -- MAC address learning (after replacing the outer label) -- to be forwarded in accordance with the MAC table VFP and SVLAN VFP directly replaces the tag on the customer port, and then does MAC learning and forwarding. SVLAN directly mirrors the data stream to the exit and then replaces the tag. 1, a label, 2 bytes of TPID (0X8100), 2 bytes of TCI (3 bit priority, +1 bits, CFI+12 bits, ID) 2, QinQ CE1 where the user network arrives at the customer (access) port of the switch PE1, regardless of whether the message is tagged or untagged, Switch PE1 are forced into the outer layer of the label (reach to end customer interface off label). Interface: outer vlan:customer-, access, uplink-, trunk 3, SVLAN can play different outer labels for different inner layer tags (unlike QinQ tags on all data frames). Interface: Need to pass through vlan:customer-, tag, uplinK-, tag. Outer vlan:customer-, untag, uplinK-, tag Helpvlan:uplink- untag (global planning only) -- -- -- -- -- -- -- -- -- -- -- Outside the QinQ session-no label: VLAN 1 customer-port fei_1/1 uplink-port fei_1/4 in-vlan 100-500 ovlan 997 VLAN pass through: VLAN QinQ session-no 3 customer-port fei_1/1 uplink-port fei_1/3 in-vlan 600-1024 untag helpvlan 4094 No tagged f