vc 常见调试错误代码（VC common debug error code）.docVIP

vc 常见调试错误代码（VC common debug error code） When creating a MFC project, you do not use the MFC AppWizard wizard. If you do not set the project parameters, you will create a lot of connection errors at compile time, such as error LNK2001 errors and typical error prompts: Libcmtd.lib (crt0.obj): error, LNK2001:, unresolved, external, symbol, _main LIBCD.lib (wincrt0.obj): error, LNK2001:, unresolved, external, symbol, _WinMain@16 Msvcrtd.lib (crtexew.obj): error, LNK2001:, unresolved, external, symbol, _WinMain@16 Nafxcwd.lib (thrdcore.obj): error, LNK2001:, unresolved, external, symbol, __beginthreadex Nafxcwd.lib (thrdcore.obj): error, LNK2001:, unresolved, external, symbol, __endthreadex The solution is described below: 1. Windows subsystem settings error, prompt: Libcmtd.lib (crt0.obj): error, LNK2001:, unresolved, external, symbol, _main The Windows project uses the Windows subsystem, not the Console, so you can set it up like this: [Project] -- [Settings] -- select the Link property page, Change /subsystem:console to /subsystem:windows in Project Options 2. Console subsystem settings error, prompt: LIBCD.lib (wincrt0.obj): error, LNK2001:, unresolved, external, symbol, _WinMain@16 The console project uses the Console subsystem instead of the Windows setting: [Project] -- [Settings] -- select the Link property page, Change /subsystem:windows to /subsystem:console in Project Options 3. program entry settings error, prompt: Msvcrtd.lib (crtexew.obj): error, LNK2001:, unresolved, external, symbol, _WinMain@16 Typically, the program entry function of the MFC project is WinMain. If the Unicode version of the project is compiled, the program entry must be changed to wWinMainCRTStartup, so you need to reset the program entry: [Project] -- [Settings] -- select the C/C++ property page, In Category, select Output, Then fill in Entry-point symbol wWinMainCRTStartup, you can 4. thread runtime library settings error, prompt: Nafxcwd.lib (thrdcore.obj): error, LNK2001:, un