windows系统中的路由详解(Routing detail in Windows system).doc

windows系统中的路由详解(Routing detail in Windows system).doc

  1. 1、本文档共10页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
windows系统中的路由详解(Routing detail in Windows system)

windows系统中的路由详解(Routing detail in Windows system) Routing detail in Windows system Catalog: First, what is routing in the windows system? Two, how to manually add routes in a Windows system Text: First, what is routing in the windows system? Most hosts typically reside on a network segment that connects only one router. Since only one router, so there is no problem in the data packet to the remote computer to use: what a router, the routers IP address can be used as the default gateway to all the computers on that segment to enter. However, when you have two or more routers on the network, you dont necessarily want to rely only on the default gateway. In fact, you might want to pass some of your remote IP addresses through a specific router, while other remote IP passes through another router. In this case, you need the corresponding routing information, which is stored in the routing table, with each host and each router having its own unique routing table. Most routers use special routing protocols to exchange and dynamically update routing tables between routers. In some cases, however, the project must be manually added to the routing table on the router and host. Route is used to display, manually add and modify routing table items. Route print-- this command is used to display the current item in the routing table. All of these items are automatically added because the network adapter is configured with the IP address. Route add-- uses this command to add a letter routing project to the routing table. For example, if you want to set a destination network 209.98.32.33 routing, which goes through 5 router network, the first to go through a router on a local network, IP 202.96.123.5, subnet mask of 255.255.255.224 and then you should enter the following command: Route, add, 209.98.32.33, mask, 255.255.255.224, 202.96.123.5, metric, 5 Route change-- you can use this command to modify data routing, but you cant use this command to change the destination of the data

文档评论(0)

jgx3536 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6111134150000003

1亿VIP精品文档

相关文档