xx座主机吊缸检修（Repair of XX block main engine suspension cylinder）.doc

xx座主机吊缸检修（Repair of XX block main engine suspension cylinder） The so-called host suspension cylinder overhaul is to remove the cylinder head, transfer piston assembly, cylinder head, air valve, piston assembly, such as inspection, measurement and repair. The specific procedures are as follows: First, the preparatory work (1) the chief engineer has made arrangements for the task of hanging cylinders, and the need to prepare them for implementation, and stresses the importance of safety. (2) preparation requires tools, gauges, materials, spare parts. (3) check lifting tools, such as driving, hoist, chain, wire rope, hanging piston professional sling, to ensure safety and reliability. (4) check the main starting valve and air bottle outlet valve is closed, close the control air, safe air, exhaust valve drive air, drain the air in the pipe. (5) close the fresh water inlet and outlet valve of each cylinder, release some of the fresh water, stop the lubricating oil pump, fuel pump, and close the fuel inlet valve. (6) check whether the indicator valve of each cylinder is opened. (7) check whether on turning gear. (8) on the control board, the sign indicating that the vehicle is being checked and not allowed to move is being hung. Two, cylinder head hanging out and inspection (1) the head of the pipe and the connection removal mechanism, such as the burning of the tubing, hydraulic exhaust mechanism (oil), air pipe, water pipe, exhaust pipe, mark cloth. (2) confirm the pipeline and tubing have been removed after the cylinder head, can release the special hydraulic cylinder head nut (hydraulic pressure, remove the 900-990bar) and then hand unscrew cylinder head nut, remove the nuts and washers are properly placed. (3) lift the cylinder head with a special cylinder head sling. (4) check the joint surface at the bottom of the cylinder cover. (5) check whether the cylinder cover is cracked or not. (6) check the exhaust valve, valve seat and so on. (7) check the cooling water ca