一塌胡涂（Fearful mess）.doc

一塌胡涂（Fearful mess） Update time: 2007-12-9 16:01:25 browse times: 2099 A fault Printing ink shades appear in parallel with the roller axial and streak imprinting, called printing bar, commonly known as taping, cops, Michiko, head, this is a kind of offset is general and difficult to solve printing problems. If a minor, it will not affect the overall picture, but if serious enough to affect the picture effect or accuracy, the customer does not accept, you must find a way out. Complete elimination is not easy, and even impossible, can only minimize the impact. The bar is often caused by a variety of factors, it is difficult to quickly identify and eliminate. According to the phenomenon and characteristics of beam can be divided into two types: one is the ink dot occur irregularly increased and elongated, ghosting, ink aggravated, formed an obvious dark streak, called the color ink bar, usually in the printing lines, text, and when the dot image field; the two is the water in the local bar, bar, image dot irregular narrowing, constitute a clear light streak, called water bar, also known as white bars, colorless white bar is also due to ink layer thinning or narrowing caused by the change of the dot blot. The above two kinds of bars are caused by the bad contact between the blanket, water roller and the printing plate surface. Causes of the stick Due to the printing plate cylinder, impression cylinder space collision and impact in the process of transformation and working face, cam and connecting rod mechanism vibration under the inertia effect, and the drum outer surface no longer do so in uniform rolling speed, rollers and plates, plates of the rollers and rubber roller, rubber roller and roller between, will produce tiny slip, and the destruction of the balance, because the ink layer ruptures and the influence of ink layer thickness, resulting in the increase or decrease in seven outlets, parallel to the cylinder axis direction. The speed of the machine is high, the m