烟道防腐保温设备施工方案（Construction scheme of flue gas corrosion protection and thermal insulation equipment）.docVIP

烟道防腐保温设备施工方案（Construction scheme of flue gas corrosion protection and thermal insulation equipment） Construction scheme of flue gas corrosion protection and thermal insulation equipment 1.1 pipe insulation Pipe insulation is designed according to the material and insulation thickness. First, the insulation shell and tube pipe insulation, steam pipeline insulation adopts the project of aluminum silicate fiber products, then use galvanized iron shell and tube secured, each layer of material with galvanized wire binding, each heat insulation material not less than two strands of wire, insulation materials, laying to staggered joint seam. After the laying of the main heat preservation layer, the external protection layer is constructed, and the outer protection layer adopts metal outer protection, and the thickness of the outer layer is as follows 0.5mm aluminum alloy plate. The metal outer protective material processing needs a set of Baitie processing machinery. To ensure the quality of the project we are going to buy a new set of Baitie processing machinery, to ensure that the insulation outer appearance processing. The pipe bend is processed into a bend shape of the dried shrimps, and the valve is made into an insulating box, which is beautiful and convenient for disassembly. The outer fixation adopts core aluminum rivets, the spacing is about 200mm. Installed metal outer protective layer should be firm, beautiful and waterproof. 1.2 flue and equipment insulation Flue and equipment insulation materials using rock wool protection layer, using 0.7mm thick profiled aluminum alloy plate. Construction sequence is: first welding thermal insulation fasteners and external support components (not allowed welding equipment, can use packing hoop way), and then laying rock wool board, to design thickness, and finally install the outer guard board. 1.3 operating conditions and job preparation 1.3.1 design documents and relevant technical documents are complete, construction draw