制作ppt法则（Making the PPT rule）.docVIP

制作ppt法则（Making the PPT rule） PPT is short for Microsoft office software Power Point, and is a well known display tool. In general, a complete PPT process requires only three steps: [1] conceive PPT [2] make PPT [3] show PPT Many times, we are more concerned about [2] this link. But in fact, [1] and [3] are equally important. (two) On one occasion, we are going to make an important report to our clients. Our project manager made a PPT. The week before we went, we did a drill to prepare for the accident. The content of the project managers PPT looks roughly like this: [1] welcome page [2] agenda outline [3] content introduction and demonstration of the project [4] concluding remarks This is a typical PPT structure. In many cases, it is more appropriate. If it is an ordinary technical exchange, or a report, such a golden mean effect is perfectly acceptable. But, this time, we hope to have some different places, because our competitors in front of us, if according to this structure, not only is nothing new, but more than that, also let a person be sleepy straws. We are determined to make some changes. So the next question is: how to change? What should I do? This involves a central question: how is the core of the content of the PPT conceived? Is that a problem? Isnt that a problem? [PPTs rule 1] identifies the audiences questions and finds the content and logic As with all system design, identifying the target audience is the first thing to do. Understanding the audience is not entirely for marketing purposes, but rather the starting point for the dissemination of information. Everyone has seen discovery and has a particularly deep impression on his detective narrative and tone of voice. Why? In the words of television people, the question is to lead the narrative. To put it bluntly, if you can attract an audience with a problem, then unlock the problems in his mind one by one. Your content and logic dont have much problem. The audience is always led by your nose, comp