同学们一起探讨过的题 修订版（The revised edition discussed by the students）.docVIP

同学们一起探讨过的题 修订版（The revised edition discussed by the students） The role of the traction unit moves the Shearer to cut the cutting mechanism into the coal wall or to move coal or to move it. Traction unit, mechanical traction, hydraulic traction, electric traction. Coal machine antiskid device; anti-skid brake lever device type antiskid device, safety winch. Distance of working face advancing during the first caving of direct roof. It is called the direct roof and the first caving step The length of pillar mining face is 10 to 30m Wall coal mining face length 80 to 250m 1., make the working face pressure increase, so it is called (initial pressure) 2. comprehensive mechanized coal mining refers to the entire production process of coal mining, including coal caving, coal loading, support, roof control and face transportation, etc., all of which have been mechanized. 3.A1 specification (594*841) 4. the main view is right, the main view and the left view are in Gaoping, and the width of the left view is equal to the left A view obtained from the front to the back of the main view A view obtained from top to bottom on a horizontal surface Left view, left to right, side view 5. carbon content of carbon steel is below (1.5%) 6. in the height of the coal seam, adjust the roller up and down to become high 7., anti-wear hydraulic oil every 15 days sampling, every other month to conduct a comprehensive inspection. The gear oil is tested every other month 8., shearer no water supply, open the cutting part, clutch idle (10 - 15) minutes, oil temperature to about 40 degrees Celsius, remove air. 9., when the seam angle is greater than 10 degrees, anti slip device should be installed, and 16 degrees, hydraulic winch should be installed, 10., four pick up for (class inspection, daily inspection, weekly inspection, monthly inspection). 11., strict implementation of the four pick up, but also on the coal mining machine (compulsory overhaul) 12. a section that will be removed between th