美国DILLON测力计.pdf

Mechanical Force Gauges Measure tension, compression or push/pull Dillon Model X Mechanical Force Gauges Measure tension, compression and push/pull. Model X-PP with Model X-C with Model X-ST with compression/tension compression calibration tension calibration calibration Model X-C comes in nine Dillon offers the Model X-ST in seven Force gauges calibrated in push- capacities ranging from 50 lb to capacities from 100 lb to 10,000 lb or pull are available in four capacities 25,000 lb or 50 to 10000 kg. All 25 kg to 5000 kg. Accuracy is ±1% in pounds ranging from 50-0-50 lb feature accuracy of ±1% of full of full range. (Note: For applications up to and including 2,500-0-2,500 capacity, except the 25,000 (10000 requiring capacities beyond 10,000 lb and three metric capacities from kg) capacity instruments which are lb or 5000 kg in tension, consider the 50-0-50 to 1000-0-1000 kg. Accuracy accurate to ±2% of full capacity. Dillon Dynamometer). is ±2% of maximum dial reading (based upon total capacity of both Load is applied against a hardened Tension Force Gauges in capacities compression and tension scales). ball which rotates to maintain vertical through 2,000 lb (1000 kg) alignment as pressure increases. are supplied with two rod-end Model X-PP gauges in capacities The ball is held in place with a spring connectors. 5,000 and 10,000 lb up to and including 500-0-500 lb or clip or retainer. A threaded mounti