基于IE的双作用离合器柔性装配线优化设计.pdfVIP

机械工程师 MECHANICAL ENGINEER 基于 IE的双作用离合器柔性装配线优化设计 余华峰^江强强圆， 张祖辉员 (1.浙江铁流离合器股份有限公司，杭州311103; 2.合肥工业大学机械工程学院，合肥230009 摘 要 ：针对某企业双作用离合器装配线生产效率不高、柔性低，难以适应生产计划要求的不同生产节拍，基于精益生产的 思想，运用工业工程分析方法对双作用离合器装配线进行生产线平衡分析，分解作业内容，合并工序，更换设备，优化工位 器具，并给出了装配线两种不同生产节拍的人员布置情况。通过对比改善前后的数据得出改善结果：生产节拍降低了很多， 装配线平衡率和产能得到较大提高。 关键词：双作用离合器；柔性装配线;优化设计;工业工程 中图分类号:TP 391.7 文献标志码:A 文章编号：1002-2333(2017)05-0094-05 Optimal Design of Double-acting Clutch Flexible Assembly Line Based on Industrial Engineering YU Huafeng 1, JIANG Qiangqiang2, ZHANG Zuhui 1 (l.Zhejiang Tieliu Clutch Co., Ltd ., Hangzhou 311103, China ; 2.School of Mechanical Engineering, Hefei University of Technology , Hefei 230009, China Abstract ： A double -action disc spring clutch assembly line has disadvantages of low production efficiency and flexibility , so it is difficult for this assembly line to meet the different requirements of production planning required tact . Based on the idea of lean production , analytical method of industrial engineering is used to carry out assembly line balancing analysis , operations analysis for double-acting clutch disc spring assembly line to optimize the design of the assembly line . Personnel arrangement of two different production cycle time are given for this assembly line . Results prove that this improvement greatly reduces production cycle time , and improve assembly line balancing rate and productivity . Key words : double-acting clutch ; flexible assembly line ; optimization design ; industrial engineering 〇 引 言 现有装配生产线优化的研究主要是运用遗传算法、 装配的基本任务就是在一定的生产条件下，以高生 粒子群算法等启发式算法优化工序的问题，结合工业工 产率和低成本装配出高质量的产品。对于以装配者手工