dm 进化意见（DM evolutionary views）.docVIP

dm 进化意见（DM evolutionary views） Smooth start? / hill start techniques: Two? Fast slow pause two fast two slow pause 1. Ping Lu started operating essentials? The left foot quickly on the clutch pedal lever, the right hand will hang into the 1 block. Look at the mirror, open the left turn lights, horn (except tooting area). The right to release the parking brake (hand brake). The foot disengages the clutch pedal to the half linkage (body shaking, engine sound smaller) position stop, while the right foot throttle position slow with about 1/3. When the car running smoothly, then slowly lift the clutch pedal to the top and bottom, put your left foot on the clutch pedal left, starting operation is complete. Start: start hanging 1 block, jingle steering (light) on the horn (tooting except). Loosen the hand brake, rear dont leak. Clutch fast, stop, slow, putting the oil gently. Pause and with oil, focus on it. 2. smooth start key to start the car, lift the clutch pedal fast, slow, stop three different process, can achieve a smooth start, the key lies in whether we can grasp the opportunity to stop. The car from static state transition to walk, will produce a static inertia. Like a person holding a cup of water to walk, to ensure the water does not spill out, the foot force must be the light, light in the car in the starting process on the performance of the clutch half linkage position, which carried clutch pedal stop when the engine is moving through the clutch half linkage state (also called contact point) to gently walking device, the output power is small state can keep the car walking in super low speed state. So, in this position to pause for a period of time, in order to make the car a smooth start at a lower power state. 3. common problems in the novice at the start The start when the flame started off, because the clutch pedal too fast, not in the half linkage stopped position, at the same time with the oil caused by small, or is to be a pause position missed. The