linux下双网卡绑定配置（Dual NIC binding configuration under Linux）.docVIP

下载本文档

16
0
约9.06千字
约 13页
2017-09-05 发布于河南
举报
版权申诉

linux下双网卡绑定配置（Dual NIC binding configuration under Linux）.doc

1、本文档共13页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

linux下双网卡绑定配置（Dual NIC binding configuration under Linux）

linux下双网卡绑定配置（Dual NIC binding configuration under Linux） In Linux how to do the double network card binding redundancy? A Linux, Channel Bonding The current release in each of the Linux, the most commonly used kernel version should be the version of 2.4.x, Linux and Channel Bonding, in Linux 2.4 kernel, provides bonding driver, can support multiple network adapters together as a network adapter to use. In Linux, high availability network card is through state monitoring of MII or ETHTOOL to achieve, therefore, need to check whether the network adapter system support MII or even ETHTOOL state monitoring. You can use the command ethtool eth0 to check if the connection status display Link detected: information and implementation, there is no problem. If the network adapter in the system does not support MII or ETHTOOL state monitoring, when the connection fails, the system can not be detected, at the same time, the bonding driver is loaded, a record does not support MII and ETHTOOL warning information. Briefly introduce the basic method to achieve: First of all, we need to open the kernel support for bonding. Set the make menuconfig/xconfig/config in the kernel, Network device support section select Bonding driver support, proposed to set the driver module, so as to support to the drive parameters and is provided with a plurality of bonding devices. Build and install the new kernel and module. The setting of Bonding We need to add two lines in /etc/modules.conf, so that it can be set in the bond setting, the driver when the system starts automatically load bonding Alias bond0 bonding Options bond0 miimon=100 mode=1 When mode=1 the main standby mode, mode=0 for load balancing model. In addition, in the /etc/sysconfig/network-scripts directory, create a file named ifcfg-bond0. DEVICE=bond0 IPADDR=192.168.1.1 NETMASK=255.255.255.0 NETWORK=192.168.1.0 BROADCAST=192.168.1.255 ONBOOT=yes BOOTPROTO=none USERCTL=no Script all network adapters in bond, SLAVE and MASTER are def