proe中的关系式（Relation in proe）.docVIP

proe中的关系式（Relation in proe） The landlord, the so-called relation about common meaning, actually is not a simple answer. May be for this reason, this post No one shows any interest in. I see the long no response, then determined to overcome , the words of. In Pro/E, use formula to define the curve, in other words, the modeling curve is depends on the relation to specification, or export. The relevant data shows Pro/E relationship, function mainly has the following functions: the use of these relations in the mathematical function. The following operators can be used for the relationship (including equality and conditional statement type). In the formula can also include the following mathematical functions: Sqrt (square root) Asin (inverse sine) ACOS (arccosine) (atan) antitangent (Sinh) hyperbolic sine (COSH) hyperbolic cosine (tanh) hyperbolic tangent Note: all are using the unit of trigonometric function. (log) 10 to the end of a few (LN) natural logarithm Exp (E) power ABS (absolute value) (ceil) is not less than the minimum value of the integer (floor) do not exceed the maximum integer value Can give the function of ceil and floor plus an optional argument, it specifies the rounding of decimal digits. With round parameters of these functions is grammar: Ceil (parameter_name or number, number_of_dec_places) Floor (parameter_name or number, number_of_dec_places) The number_of_dec_places is an optional value: ? can be expressed as a number or a user defined parameter. If the parameter value is a real number, it is truncated as an integer; The 8 is the maximum value of it?. If more than 8, will not be rounded to round number (the first argument), and the use of its initial value; ? if you do not specify it, with the previous versions of the same function. Do not use specified decimal digit ceil and floor functions, for example as follows: Ceil (10.2) = 11 Floor (10.2) = 11 Using the specified decimal digit ceil and floor functions, for example as follows: Ceil (10.2