s7200以太网（S7200 Ethernet）.docVIP

s7200以太网（S7200 Ethernet） The SIEMENS industrial professional website, introduces the Ethernet communication method. Directly in the STEP7 v4.0 version, with a menu of earthnet winzard can direct hardware configuration, configuration when the first RS232 port (or desktop computer and laptop) communication. PLC restart can be used after the Ethernet communication. Tongziguangd commonly used S7-200 to connect with the host computer via Ethernet, 2009-11-22 21:37:45 The S7-200 with the host computer via Ethernet connection with 3 methods: 1) the most popular method: Dalian winbest international electronics CP243i, its advantage is not to install any software and drivers in S7-200 PLC and pc.. Especially suitable for beginners. It has a guide installation (or screws) type and compact type two. At the same time also can replace 100% programming cable. 2) the use of SIEMENS CP243-1, the shortcomings need to be set over some basic parameters of CP243-1 S7-200 PLC in the download cable programming, and according to the Ethernet wizard to set MICROWIN method, more trouble, it is difficult for beginners. 3) the use of RS485 to Ethernet adapter, the disadvantage is to install a virtual serial port driver, the stability of the system is slightly worse, and the data transmission speed is slow. Four Fifteen April Two thousand and ten The common problem of SIEMENS S7-200 SIEMENS PLC 1, how much is the analog input resistance template EM235? The input resistance and the size of your choice is related to the type of input, if you choose the input voltage, so that the input impedance is not small 10 megohm; if the input current input resistance of 250 ohms 2, when using EM231RTD module the measurement values represent what meaning? When you use the EM231RTD module, the measurement of the actual temperature value is divided by 10. The module itself can measure the range is 3276.8 to 3276.7 degrees Celsius, but the measuring range of the actual measurement range depends on the sensor an