spcomm的一些注意（Some of SPComms attention）.docVIP

spcomm的一些注意（Some of SPComms attention） Some of the SPCOMM Usage Note The use of serial SPCOMM receive data when 0X11 and 0x13 cannot accept, from the time interval that can receive, but cannot be displayed. Online check wrong: OutX_XonXOffFlow/InX_XonXoffFlow: this property refers to send / receive the software handshake sign between the two handshake signal data is considered to be the communication data received after the handshake signal, the communication will be suspended. FOutx_XonXoffFlow: = True; FInx_XonXoffFlow: = True; XOffChar/XOnChar: This refers to the handshake byte, the default initial, there FXonChar: = Chr ($11); FXoffChar: = Chr ($13); So far, The case is entirely cleared. 0X11, 0x13 occupied for handshaking signal, nature will not get the right treatment. The problem is found, it is easy to solve. Only in the initialization of Comm, its definition Comm.Inx_XonXoffFlow: = False; Comm.Outx_XonXoffFlow: = False; Using Delphi serial communication, commonly used methods are: the use of controls, such as Mscomm and Spcomm control; API function; call other serial communication program in Delphi. The advantages of using API method is more suitable for low level communication procedures more complex to write, but the drawback is the preparation of serial communication program is more complex, the need to master a lot of knowledge communication. Spcomm Small-Pig Team is the development of a third Delphi serial control, the control has properties and events are closely related with the serial communication of the rich, offers a variety of operations on the serial port, and the programming is simple, versatility and portability. In the Delphi software development has become a widely used serial communication control. Spcomm achieved a total of three classes: class Tcomm, serial read and write thread class thread class TreadThread TwziteThread[1]. An instance of the Tcomm method in StartComm open the serial port, and instantiates a read and a write thread Rea