policy route（策略路由）.docVIP

policy route（策略路由） Policy routing configuration command Route map and ACL is very similar, it can be used for routing and policy routing and then released, often used in BGP (policy route). The routing strategy is actually a static routing complex, static routing is based on the target address of the packet is forwarded to the designated the next hop router, routing strategy using and extending IP ACL link, filtering and classification so as to provide more functions The route command map: A route re released The match command routing and re released with: 1.match interface {type number}... Type number]: Specifies the next hop router, routing interface 2.match IP address {ACL number|name}... ACL number|name]: ACL, the designated target IP address routing 3.match IP next-hop {ACL number|name}... ACL number|name]: the next hop router routing address specified by ACL matching 4.match IP route-source {ACL number|name}... ACL number|name]: ACL, the designated router announced routing 5.match metric {metric-value}: Specifies the size of the metric route matching 6.match: route-type {internal|external[type-1|type-2]|level-1|level-2}, designated OSPF, routing type routing EIGRP or IS-IS 7.match tag [{tag-value}... Tag-value]: matching with a label (tag) routing Then release set and routing orders could be used together: 1.set level {level-1|level-2|level-1-2|stub-area|backbone}: set IS-IS Level, or OSPF, success will be re released, routing to the region 2.set metric {metric-value|bandwidth delay RELY load MTU}: set the metric size to match the success of routing 3.set metric-type {internal|external|type-1|type-2}: metric type is set to match the success of routing, the route will be posted to OSPF or IS-IS 1 4.set next-hop {next-hop}: the successful matching route specifies the next hop address 5.set tag {tag-value}: set the label for successful matching routing Two routing strategy The match command can also be used together with policy routing: 1.match IP address {ACL nu