【离合器故障的诊断（Clutch fault diagnosis）.docVIP

【离合器故障的诊断（Clutch fault diagnosis） The clutch device between the engine and the transmission, its technical condition directly affects the engine power transmission, and the transmission gear manipulation, which requires the combination of reliable, smooth clutch to complete separation, abnormal sound transmission. The clutch used quite frequently, wear or damage is inevitable, technical condition easily worse or malfunction. A clutch slip fault diagnosis Fault phenomenon: The car started when the clutch pedal is fully lifted, starting difficult. In the process of running speed can not be added with engine speed Fast and rapid increase in vehicle power shortage, and clutch produce burnt smell, this phenomenon is suspected of clutch slip. Fault judgment: the gear start method and shaking car method. 1, gear start method: tighten the hand brake, hang into the low gear, slowly lift the clutch pedal, gentle gas. If the car is not motionless, the engine flameout, diagnosed as slipping clutch. 2, shake the car: hang into the low gear, pull hand brake, turn the engine crankshaft by hand. If you can rotate, can also be diagnosed as slipping clutch. Troubleshooting: 1, check the clutch pedal free travel without. The method is carried on the pedal, Pingganjiao judgement. More intuitive is to remove the clutch cover, watch the release lever and separation between bearing gaps. No gap is free travel, should be adjusted. 2, if the pedal free travel to meet the requirements, inspection, inspection from under the vehicle friction clutch disc periphery is clean or not. If there is oil thrown out, friction film on the oil spill caused by slipping. If there are signs of burning and in the hot car had burnt smell, smoke phenomenon is clutch skid ablation. A clutch pedal in the drivers position, another man struck with a screwdriver driven disc friction plate in the car, if found in the falling of aluminum powder, is exposed and slipping clutch friction plate rivet. The second column sl