双螺杆挤出（Twin screw extrusion）.docVIP

双螺杆挤出（Twin screw extrusion） Common knowledge of screw assembly in twin screw extruder 2007-11-18 20:51 Extruder common sense and process (temperature, screw) I. classification of extruders Product code specification parameter Description: for example, SHJM-Z40 * 25 * 800, refers to the screw diameter of 40mm, the length diameter ratio of 25, traction roller length of 800mm double screw plastic extrusion molding machine. 1, SH category code, refers to the twin screw mixing type (also write: SHSJ, SJ refers to plastic extruder) 2, J group code, refers to the extruder. 3, M refers to the variety code, refers to blown film machine 4, Z refers to the auxiliary code, refers to the main unit, such as F refers to the auxiliary machine. 5, 40 x 25 x 800 refers to specifications, refers to the screw diameter of 40mm, the length diameter ratio of 25, traction roller length of 800mm. 6, the last one for manufacturers to identify the serial number, generally does not appear, was omitted Two. Function parameters of twin screw extruder 1, D is the diameter, an important parameter to measure the size of the output. 2, L/D, refers to the length and diameter ratio, directly affect the degree of plasticization, is a measure of the use of signs, general plastic modified with about 30-40, commonly used 36:1 or 30:1. 3, H, the depth of the spiral, refers to the size of its material space. 4, e thickness of the screw, the process is reflected in the size of the shear. 5, 6 screw and the gap between the barrel, an important parameter of extruder quality, generally in 0.3-2mm, over the 5mm extruder is the police line. 6, N host speed, refers to its highest value, refers to a processing adjustment range, greatly affecting the production and the division of middle, high and low speed. (domestic machine general 500-600r/min) Such as: max:600r/min, low speed: 350r/min, medium speed 230-240r/min, high speed 450-600r/min. 7, P, motor power and heating power. Three, screw arrangement and process s