吸塑制品介绍（Plastic products introduction）.docVIP

吸塑制品介绍（Plastic products introduction） Plastic products introduction First, the main categories of plastic products 1, if classified according to the thickness of the material, it can be divided into A, ordinary thin plastic thickness is 0.14 ~ 5.0mm -- mainly by PVC, PP, PS (HIPS), PET (including APET and PETG), PE, BOPS and Recyclable paper tray made of various materials such as folding, folding, and the effect of the seventy percent off cylinder, folding box, box, high frequency etc. non thermal molding plastic products, widely used in food, medicine, electronics, toys, computer, daily necessities, cosmetics and mechanical hardware and other industries. B, special thick plastic thickness is 0.14 ~ 8.0mm -- mainly by PVC, PP, PS (HIPS), PET (including APET and PETG), the type of injection molding plastic products, materials and effect of ABS PC, PE and PMMA etc, the main products are refrigerator liner, advertising light boxes, merchandise display, pet cage chassis, rear projection TV shell and various mechanical panel, can replace plastic products, mold with low cost (only the injection mold 1/20), short production cycle, mold development time is short (usually as long as 3~5 days) etc.. The reason is not the kind of material classification, mainly taking into account the ordinary thin plastic and special thick plastic materials used have some differences, but PVC, PP, PS and PET are in the two kinds of plastic products occupies a space for one person, called the four kings plastic products timber family ! PVC yingpian toughness moderate, easy combustion, combustion will produce chlorine, some impact on the environment, PVC is easy to heat, can use sealing machine and high frequency machine edge, is the main raw material for the production of transparent plastic products. PS yingpian density low, poor toughness, easy combustion, combustion will produce styrene gas (a toxic gas), so commonly used to produce all kinds of plastic tray for industrial use. PET yingpian