二氧化氯发生器操作流程(Operation process of chlorine dioxide generator).docVIP

  • 0
  • 0
  • 约6.92千字
  • 约 6页
  • 2017-09-07 发布于河南
  • 举报

二氧化氯发生器操作流程(Operation process of chlorine dioxide generator).doc

二氧化氯发生器操作流程(Operation process of chlorine dioxide generator)

二氧化氯发生器操作流程(Operation process of chlorine dioxide generator) Operating procedures and precautions: First, check before starting (1) the preparation of raw materials: the use of chlorine dioxide generator raw material is 25 percent liquid sodium chlorite, 31-33% of concentrated hydrochloric acid, the two kinds of raw materials can be purchased directly from the market, without further dilution and preparation. (2) check whether the raw materials of hydrochloric acid and sodium chlorite used in the chlorine dioxide generator are inserted into each of their own barrels. (3) check whether the pressure water (tap water) valve of chlorine dioxide generator is opened (usually not adjusted again after normal adjustment). (4) check whether the two valves of chlorine dioxide generator wash water are closed. (5) check the chlorine dioxide generator of chlorine dioxide solution outlet valve open, such as only a chlorine dioxide generator should be at the same time, another chlorine dioxide generator of chlorine dioxide solution outlet valve closed. (6) check the total switch on the master switch box, whether the pump and the metering pump are closed. Two, boot (1) press the button switch on the booster pump generator of chlorine dioxide and chlorine dioxide solution when the chlorine dioxide generator added the treated water, and calculate the pump light (green) (2) press the metering pump button switch on chlorine dioxide generator. At this time, chlorine dioxide generator produces chlorine dioxide solution, and the indicator light of booster pump is (green light). (3) the chlorine dioxide generator adopts unique design to make the booster pump work intermittently and generate chlorine dioxide intermittently, thus saving power consumption. The booster pump starting mainly by chlorine dioxide solution to control the liquid storage tank, liquid level low, pump; pump stop; high level, low low level and high level, the system automatically cut off the power supply and alarm, boost

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档