光电开关简介（Introduction to photoelectric switches）.docVIP

光电开关简介（Introduction to photoelectric switches） The principle and application of photoelectric Address: /b842791/htmID: monjoy published: 2007-9-28 13:11:52 I. Introduction The photoelectric switch sensor is a member of the family, the variation of intensity between transmitter and receiver of light into the change of electric current to achieve the purpose of detection. The photoelectric switch output circuit and the input circuit is electrically isolated (i.e. electric insulation), so it can be used in many occasions. Two, the photoelectric switch 1, the working principle of photoelectric switch (photoelectric sensor) is a photoelectric proximity switch for short, it is the use of the object to be detected on the beam occlusion or reflected by synchronous loop gating circuit to detect whether the objects. The object is not limited to metal, all reflection objects can be detected. The photoelectric switch will convert the input current injection into optical signals at the transmitter and receiver according to the received light intensity or not to detect objects. The working principle as shown in figure 1. Most of the photoelectric switch is used infrared light wave wavelength close to visible light. Figure 2 is a part of the photoelectric switch is the German company SICK. Classification and terminology of photoelectric switch, 2 (1) classification The diffuse reflection type photoelectric switch sensor: it is a set of transmitter and receiver in one, when the tested object passes objects a sufficient quantity of photoelectric switch transmitter light reflected to the receiver, so the photoelectric switch produces switch signal. When the tested object surface light or its reflective rate is extremely high, the photoelectric switch of diffuse reflection is the preferred mode of detection. The mirror reflection type photoelectric switch: it is set in one transmitter and receiver, photoelectric switch transmitter emits light after reflected by the