公差（tolerance）.docVIP

公差（tolerance） Position, coaxiality, symmetry, parallelism, perpendicularity, inclination, cylindricity, flatness, roundness, straightness, surface profile, line profile, jump, jump round of what they all mean? Straightness Straightness is said parts of the actual shape of the linear element to maintain the ideal line condition. The straight degree is usually said. Straightness is the largest amount of variation permitted by the actual line on the ideal line. It is in the given pattern, with changes in scope to restrict the machining error of actual line allowed. Flatness The plane is that part of the actual shape of plane elements, maintain ideal level. The level that is usually said. Flatness tolerance is the largest amount of variation permitted by the actual surface on a plane. In the drawing is given, with the change of scope to restrict the actual surface error allowed. Roundness Roundness is said parts of the actual shape of circular elements, and keep the center offset. That is to say the degree of roundness. The roundness tolerance in the same section, the circle of the largest amount of variation permitted upon the ideal circle. Is the pattern given, with the range of machining error to limit the actual round allowed. Cylindricity Cylindricity is the part on the cylindrical surface contour on each point, keep the isometric conditions on its axis. Cylindricity tolerance is the largest variation in actual cylindrical face of ideal cylindrical surface allowed. Is the pattern given, with changes in scope to restrict the actual cylindrical surface machining error allowed. Line profile Line profile is expressed in a given plane parts, arbitrary shape curve, maintain the ideal shape of the situation. Line profile tolerance refers to the non circle curve contour allows variation in the actual. Is the pattern given, with changes in scope to restrict the actual curve machining error allowed. Surface profile The surface profile is expressed on the surface of arbitrary