冷冲模常用材料（Common material for cold die）.docVIP

冷冲模常用材料（Common material for cold die） The commonly used materials of cold stamping die The mold is the mother of the industry , the mold performance, life level, directly affect the quality of products and economic benefits. The mold materials and heat treatment, surface treatment is the main factor affecting the life of various factors in the mold. At present, countries in the world are constantly developing new material mould, improvement of heat treatment process and surface strengthening technology. Chinas mold industry has been the rapid development of the rapid growth, the primary problem of mold manufacturing mold materials. There are a lot of mold manufacturing and parts, materials such as steel, cast iron, iron alloy and non alloy, high temperature alloy, hard alloy, organic polymer materials, inorganic non-metallic materials, natural or artificial diamond. But the steel is the most used and most widely used materials. Failure analysis of components Any parts have a certain design function and life. When in use, and lose the function of the original design due to external shape and internal structure of parts change, the inefficient work or not work or early retirement phenomenon. According to the working conditions and failure characteristics can be divided into: excessive deformation, fracture and degradation of surface damage and physical properties. The main failure parts including design, materials, processing and use of the four aspects, however, work failure may be single, there may be a result of many factors, but each event should have a failure leads to the main cause of the failure, which provided the main measures to prevent failure. In failure analysis, we can make the following 1 basic steps: investigation, analysis of 2 and 3 fracture analysis, microstructure and properties of the 4 components of testing and analysis, 5 comprehensive analysis and conclusion. Two, the principle of material The selection of materials is often a complicated and