加减速车道（Acceleration and deceleration lane）.docVIP

加减速车道（Acceleration and deceleration lane） Question: Hello, Guo Guo, I would like to ask the interchange in the acceleration and deceleration lane, if it is located in the main line of transition curve, how to do deceleration lane or how to use the weft drag function, thank you Answer: Hello! When the main line in the curve and is located in the transition curve, generally we will end as the starting point of this ramp is more convenient and more, is not an option, end point wiring wiring to the transition curve, because the curvature of the transition curve is changing, automatic function of the software is unable to complete the connection end point. The general design of the starting point is the document control 2 approach. At the same time, the curve curve of the first section of the ramp is usually chosen as the main curve of the variable lane area. The radius of the circle curve can be determined by the radius of the circular curve of the main line. The radius of the ramp can then be adjusted according to the separation speed between the ramp and the main line. In the choice of starting point drag, the new version of the software (dialog box) main line at the radius of curvature will automatically prompt the corresponding dynamic ramp starting point (transition curve), can be used as a user to determine a reference ramp starting point of circular curve radius. The specific curve composition may refer to the following line diagram of the interchange. Answer time: 2007/5/24 21:53:23 picture problem detailed It said: SJS unit: Tianjin city in Luqiao Hongda technology development limited liability company Name: Source: time: 2005/11/3 12:06:49 Question: Guo worked: Hello! I am a weft 5.74 users, and I would like to ask you a question about the distance between the starting point of the direct deceleration lane and the distance between the main line of the lane in the interchange ramp design. Please give me a reply during your busy schedule. Thank you The general d