参数教程3（Parameter tutorial 3）.docVIP

参数教程3（Parameter tutorial 3） Parameter 3.txt tutorial 4. Caustics defocus As a kind of advanced rendering system, VRay supports the defocusing effects rendering. In order to have the effect of your scene must have defocus light generator and defocusing receiver. (about how to make an object capable of generating and receiving method of defocus see Object settings and Lights settings, rendering parameters parameters in this part of the set is used to control the photon map generation) -- photon map interpretation can be found in the Terminology section. On - open and close defocusing. Multiplier - the booster control defocusing intensity. And it is light in all produce defocusing global application. If you need to use the booster to different light source, you need to use the local light source set. Note: the use of the local light source Set Booster booster to the scene, all the scene booster role in accumulation. Search dist VRay - when tracking a bump in the objects on the surface of the photon, the light impinging photons in the tracker and the search area around on the surface (search area). The search area is actually a photon hits the point at the center of the circle, the radius is equal to the Search value of dist. Max photons VRay - when tracking a bump in the objects on the surface of the photon, it also calculates the number of the area around the average value of photons, and then take these photons produced by the lighting in the area. If the number of photons exceeds the Max photons value, VRay will only use the arrangement of photon number value of Max photons in front of the number of. Dont delete on render end - when the item is selected, VRay photon map in memory will be completed after the retention of scene rendering. Otherwise, the photon map will be deleted at the same time, memory is released. Note: if you are going to the photon map to a particular scene is calculated only once and use it again in the next rendering, this option is particularl