freemodbus详解.docxVIP

freemodbus之协议模块2007-12-27 10:43:32??作者：??来源：freemodbus之Modbus协议配置???浏览次数：844??文字大小：【大】【中】【小】简介：Detailed Description详细描述 #include mb.h This module defines the interface for the application. It contains the basic functions and types required to use the Modbus protocol stack. A ty ...Detailed Description详细描述?#include mb.hThis module defines the interface for the application. It contains the basic functions and types required to use the Modbus protocol stack. A typical application will want to call eMBInit() first. If the device is ready to answer network requests it must then call eMBEnable() to activate the protocol stack. In the main loop the function eMBPoll() must be called periodically. The time interval between pooling depends on the configured Modbus timeout. If an RTOS is available a separate task should be created and the task should always call the function eMBPoll().这个模块为应用定义了接口。它包括了使用Modbus协议栈所必须的基本功能函数和类型。一个典型的应用程序将会首先调用eMBInit()函数。如果该设备需要回应网络请求，则其必须调用eMBEnable()函数来激活协议栈。在主循环中，函数eMBPoll()将会被周期性调用。两次调用的时间间隔决定于Modbus的超时时间设置。如果使用了RTOS，用户则必须创建一个独立的任务，并且该任务必须一直调用函数eMBPoll()。?// Initialize protocol stack in RTU mode for a slave with address 10 = 0x0AeMBInit( MB_RTU, 0x0A, 38400, MB_PAR_EVEN );// Enable the Modbus Protocol Stack.eMBEnable(? );for( ;; ) {???? // Call the main polling loop of the Modbus protocol stack.???? eMBPoll(? );???? ... }??Defines定义#define?MB_TCP_PORT_USE_DEFAULT???0?Enumerations枚举类型enum ?eMBMode?{?MB_RTU,?MB_ASCII,?MB_TCP?}Modbus协议的模式：RTU?，ASCII?和TCPenum ?eMBRegisterMode?{?MB_REG_READ,?MB_REG_WRITE?}Modbus寄存器的模式：READ和WRITEenum ?eMBErrorCode?{???MB_ENOERR,?MB_ENOREG,?MB_EINVAL,?MB_EPORTERR,???MB_ENORES,?MB_EIO,?MB_EILLSTATE,?MB_ETIMEDOUT?}错误码：没有错误，没有寄存器，无效，???，???，IO错误，无效???，超时enum ?eMBParity?{?MB_PAR_NONE,?MB_PAR_ODD,?MB_PAR_EVEN?}Modbus数据帧的校验类型：无校验，偶校验，奇校验?Functions函数eMBErrorCode?eMBInit?(eMBMode?eMode, UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate,?eMBParity?eParity)协议初始化函数输入参数：eMBMode?eMode, Modubus协议模式UCHAR ucSlaveAddress,?子模块地址U