交互式棱柱网格生成方法-计算机辅助设计与图形学学报.PDFVIP

第28 卷 第2 期 计算机辅助设计与图形学学报 Vol. 28 No.2 2016 年2 月 Journal of Computer-Aided Design Computer Graphics Feb. 2016 交互式棱柱网格生成方法 孙 岩 ( 中国空气动力研究与发展中心空气动力学国家重点实验室 绵阳 621000) (supersunyan@163.com) : 针对流动数值模拟中边界层区域棱柱网格生成与修改困难的问题, 提出一种基于物面边界约束的交互式棱 柱网格生成方法. 该方法交互生成物面边界点的空间推进面网格; 将边界点空间推进面网格的每层网格点看成边界 网格点运动得到, 计算对应的边界网格点位移; 利用径向基函数插值将边界网格点位移光滑传递给内部网格点, 获 得内部网格点的空间推进网格; 建立所有网格点之间的连接关系, 构造棱柱网格单元. 基于V 型槽、飞机机头等外形 对文中方法进行测试, 并对该方法存在的一些问题进行了讨论; 利用该方法生成一个大展弦比翼身组合体模型的棱 柱/ 四面体混合计算网格, 并在 PHENGLEI 计算平台上进行了数值模拟, 结果表明, 该方法能够生成高质量的粘性棱 柱网格. ：交互式; 棱柱网格生成; 边界约束; 径向基函数; PHENGLEI ：V211.3 Interactive Prismatic Grid Generation Method Sun Yan (State Key Laboratory of Aerodynamics, China Aerodynamics Research and Development Center, Mianyang 621000) Abstract: An interactive method for prismatic grid generation based on surface boundary constraint is presented to solve the problem that it is hard to generate and modify prismatic grid in boundary layer in numerical simula- tion of fluid dynamics. First, the space advancing grid of surface boundary nodes is generated interactively in present method; second, the displacement of surface boundary nodes is calculated based on the thought that each layer of space advancing grid is acquired through motion of surface boundary nodes; third, the space advancing grid of surface interior nodes is generated by smoothly propagating the displacement of surface boundary nodes to surface interior nodes through the use of radial basis function interpolation; at last, the prismatic grid cells are created through establishing connections of all grid nodes. The present method is tested based on V-shape groove and airplane head, and some prob