介绍显示器（Introducing a display）.doc

介绍显示器（Introducing a display） Common terms for displays: technical specifications Yu Putong users commonly used CRT display, the commonly used terms can be divided into three parts: one is the technical index terms display performance; two is the relevant international organizations, for the comprehensive performance of display certification standards, some commonly used terms are derived; three is the type of picture tube. First, explain the technical specifications of the performance of the monitor. One of the common terms used in displays: technical specifications The distance (dot pitch) The distance is one of the most common terms we display. It refers to the distance between two adjacent color phosphor pixels on the display tube of the display. For the cylindrical tube display, with space to express. In a sense, the distance determines the display of a display. The distance is smaller, the better display effect. Resolution (resolution) Resolution is the display tube, a quantization index of all pixels, defines the display resolution, the number of pixels used in horizontal direction, vertical direction and product pixels to represent. Each display usually have multiple resolution model, such as 640x480, 800x600 and 1024x768, but the maximum resolution is determined by the distance and kinescope area decision. For example, on a 15 inch 28 inch display, there are only 1155 pixels in the horizontal direction and 866 pixels in the vertical direction, so the maximum resolution can only reach 1024x768. Scanning mode CRT scan mode, interlaced and progressive scanning two kinds. The former appeared early in the product, to display an image in the picture tube, electron gun first scans odd lines, completed after the scan even numbered rows, so each picture to scan two times to complete, causing flicker is large, has been basically eliminated. The progressive scan is the first line from the top left corner of the screen, line by line scanning, display an image, just scan