做好预算-钢筋计算公式!!!（Budget calculation formula!!!）.docVIP

做好预算-钢筋计算公式!!!（Budget calculation formula!!!） Budget calculation formula!!! I. beam (1) frame beam First, the calculation of steel reinforcement 1, the upper through tendons The upper perforated rebar (rib 1 = length on long) through cross span long + two end bearing anchor value 2, end support negative ribs The negative length of end support: the first row is the anchor value of Ln/3 + end support; The second row is Ln/4 end support anchor value 3, lower reinforcement The reinforcement length = span long + about bearing anchor value The above three types of reinforcement are involved in the bearing anchor problem, then summed up the above three types of steel reinforcement anchor judgment problem: Bearing width is greater than or equal to Lae and 0.5Hc + 5D, Max{Lae, 0.5Hc + straight anchor, 5D}. The anchor end bearing steel bar = bearing width less than Lae or less than 0.5Hc + 5D, Max{Lae bending anchor, bearing width - protective layer +15d}. The middle bearing anchor bar = Max{Lae, 0.5Hc5d} 4, lumbar tendon Structure: reinforced structural reinforcement length = span length + 2 * 15d Torsion bars: algorithm with through bars 5, pull the tendons Tensile length = (Liang Kuan 2 * protective layer) + 2 * 11.9d (seismic bending hook value) + 2D Brace root number: if we do not have in the flat cloth reinforcement spacing input method given in the stretch, then stretch the root number (root number /2 = stirrup) * (structural reinforcement root number /2); if the reinforcement reinforcement spacing, reinforcement that root number = length / reinforcement reinforcement spacing. 6, stirrups Stirrup length = (Liang Kuan - 2 * protective layer + beam height -2 * protective layer) *2 + 2 * 11.9d + 8D The number of roots (= stirrup length / spacing zone encryption encryption (+1) * 2 + length / non encrypted area non encrypted area spacing 1) +1 Note: because the deduction component protection layer, are buckled to longitudinal reinforcement of the skin, then, we can find th